Shell & tube heat exchangers, falling film evaporators, forced circulation exchangers & industrial condensers. TEMA & ASME certified. Custom thermal design. Bhiwadi, Rajasthan (Delhi NCR).
Each heat exchanger is thermally designed for your specific fluid properties, flow rates, and temperatures — nothing off the shelf.
The industry standard for robust, high-capacity heat transfer. Available in fixed tubesheet, U-tube and floating head designs. Built to TEMA Class R, C and B specifications.
Efficient thin-film evaporation for heat-sensitive products. Minimal product degradation, high evaporation rates. Used in sugar, dairy, pharma and chemical concentration.
For crystallizing, scaling and high-viscosity fluids where natural circulation fails. Pump-driven flow prevents fouling and scaling on tube surfaces.
Shell & tube condensers for vapour condensation in chemical processes, distillation, solvent recovery and refrigeration systems. Custom-sized for your vapour load.
| Parameter | Shell & Tube | Falling Film Evaporator | Forced Circulation | Condenser |
|---|---|---|---|---|
| Design Standard | TEMA R/C/B + ASME VIII | ASME VIII / GMP | ASME VIII | TEMA + ASME VIII |
| Shell MOC | CS / SS304 / SS316 | SS304 / SS316L | CS / SS304 / SS316 | CS / SS304 / SS316 |
| Tube MOC | CS / SS / Cu-Ni / Titanium | SS316L / SS304 | SS316 / Duplex | CS / SS / Cu-Ni |
| Shell Pressure | Up to 200 bar | Vacuum to 5 bar | Up to 50 bar | Up to 50 bar |
| Tube Pressure | Up to 300 bar | Up to 10 bar | Up to 100 bar | Up to 100 bar |
| Temperature Range | −200°C to 600°C | 40°C to 180°C | 50°C to 300°C | −20°C to 300°C |
| Heat Duty | Up to 50 MW | Up to 10 MW | Up to 30 MW | Up to 30 MW |
| Surface Area | 1 m² – 2000 m² | 10 m² – 500 m² | 5 m² – 1000 m² | 2 m² – 1000 m² |
| Testing | Hydro / Pneumatic / RT | Hydrostatic / DP | Hydrostatic / RT/UT | Hydrostatic / DP |
Every exchanger is sized using rigorous thermal & hydraulic calculations to your exact process conditions.
Full compliance with international standards. Complete documentation and third-party inspection available.
Deep knowledge of heat transfer applications across chemical, pharma, food & power industries.
TEMA data sheets, mechanical drawings, test reports, MTRs — all provided with every exchanger.
Shell and tube heat exchangers (fixed tubesheet, floating head, U-tube), falling film evaporators, forced circulation exchangers, double-pipe exchangers, air-cooled exchangers and industrial condensers — in CS, SS304, SS316, SS316L, Cu-Ni and titanium.
TEMA (Tubular Exchanger Manufacturers Association) Class R, C and B. Shell and tube-side construction to ASME Section VIII Division 1. Indian Standard IS 4503 where required. We provide full TEMA data sheets and mechanical drawings with every exchanger.
Yes. Every exchanger is thermally designed using your fluid properties, flow rates, inlet/outlet temperatures, fouling factors and pressure drop limits. We perform calculations using software and provide a detailed process data sheet and mechanical design summary.
Shell & tube heat exchangers: 6–10 weeks from design approval. Falling film evaporators: 10–14 weeks. Timelines depend on size, material and inspection requirements. Expedited options available.